Hooking up jumper cables

Today I talked with a friend and found out that his 45 year old son was run over by a large tractor that he was working on.

Hooking up jumper cables

Next If you drive a car, you need to know how to use a pair of jumper cables. Maybe you left an interior light on or your battery has simply reached the end of its life.

Either way, car batteries don't typically give you signs of trouble until it's too late, and then your car just won't start.

Hooking up jumper cables

So no matter how old or new your car is, owning a working set of jumper cables — and knowing how to use them — is a must. First you need the right pair of cables. When you really need them, any set is better than none at all, but if you're buying new jumper cables, Popular Mechanics suggests ones that are 4 to 6 gauge and at least 20 feet 6 meters long.

Those extra-long cables will come in handy and make connecting batteries easier if you can't put two cars directly next to each other. Also look for jumpers with thicker cables and heavy clamps.

They'll be more durable and last longer. Of course, when it comes time to jump your battery, it's very important to handle the cables properly. Always keep the red and black clamps from touching, and be sure the cables stay apart when you're getting set up — especially once you have the clamps connected to a live battery.

Hooking Jumper Cables Directly to Starter. - Page 2

If the clamps touch when they're "hot," it could short out one or both cars and will definitely create some sparks. Since using jumper cables incorrectly can be dangerous, follow every step precisely.

Most jumper cables have an instruction card or label so you can make sure you're connecting them the right way. Connect the Cables Begin by parking the vehicle with the good battery next to the car with the dead battery.

Open the hoods of both cars and locate their batteries. If the batteries are covered by plastic hoods, remove the hoods so the battery posts are exposed. The positive post may be red, but it's not always, so it's best to look for the plus or minus sign to determine the post's polarity.

Before you attach the clamps, be sure to remove any dirt from the posts. Make sure that the clamp is firmly connected. Connect one of the black clamps to the negative - post of the good battery. Make sure the clamp is firmly connected.

Related Questions:

But instead of connecting the other end of the cable to the negative post of the dead battery, clamp it to a bare, metal surface on the engine of the dead car — like a bolt or a screw.

This will provide grounding for the jump start. Start the Engines Start the functioning car's engine first and let it idle for a few minutes.

Start the dead car's engine and let it idle for a few minutes. If the dead car starts without any issues, carefully disconnect the black clamp from its battery first.

Then disconnect the black clamp from the other car. Finally, remove the red clamp from the good car's battery and then from the once-dead battery. It's best to keep your car running for a good while to help recharge the battery, but you should also consider having its voltage checked to be sure it doesn't need replacing.A spark caused by hooking up the jumper cables can ignite fumes and cause the.

Electricity has a way of behaving one way on one car, but differently on another.. As long as you what the proper way to hook up jumper cables. Jumper cables are the most popular tool used to jump start cars because they are inexpensive and easy to store.

Jumper cables usually come in a variety of lengths, ranging from feet.

Hooking up jumper cables

Some people think longer cables are better so that you do not have to move a car with a dead battery. Why Does the Battery Cable Spark When Placed on a Post?

by Kristine Brite. should not be touching anything metal while the positive cable is hooked up.

Premium Vendor Showcase

Dangers. Sparks from the battery cables present some dangers. The battery is filled with explosive gases. The spark could potentially light the gases, and the battery could explode. Hooking up jumper cables and changing a tire are best learned before an emergency arises says the Car Care Council.

Learn more at VIP Tires & Service now. Cables and disconnecting cables can be damaging to connecting jumper cables to jumpstart the receiving car.

Important to the jumper cables will walk you the wires – terminal on this free video will allow the chance of jumper cables.

How to hook up booster cables?

Jun 16,  · Remember, positive to positive (+), negative to negative (-). hook the cables up to the good battery first making sure the polarity is correct, then hook them up the dead battery making sure the polarity is correct, also make sure the vehicles DO NOT touch!!! let the battery charge for about seconds then try to start ashio-midori.com: Resolved.

Where to hook jumper cables ? - Fixya